Slug/bail tests were conducted in sand layer (sbt-1 well), silty sand layer (sbt-2 well), and mixed sand and silty sand layer (sbt-3 well). Hydraulic conductivity and specific storage coefficient were estimated through slug/bail tests. Pore volumes of groundwater level drawdown zone for bail test were estimated by using hydraulic conductivity and specific storage coefficient. KGS model was most suitable interpretation method of slug/bail tests. Average hydraulic conductivity for slug/bail tests were estimated to be $6.65{\times}10^{-5}$ m/sec in sbt-1 well, $6.33{\times}10^{-6}$ m/sec in sbt-2 well, and $3.72{\times}10^{-5}$ m/sec in sbt-3 well. Average specific storage coefficient for slug/bail tests were estimated to be 0.0225 in sbt-1 well, 0.0177 in sbt-2 well, and 0.0259 in sbt-3 well. Dimensionless time and dimensionless wellbore storage were estimated by use of transmissivity, storativity, test time, and specification of test wells. And, dimensionless drawdown were selected by parameter ${\alpha}\;and\;{\beta}$ parameter from Cooper et al. (1967). Radius of influence were estimated by estimated dimensionless time, dimensionless wellbore storage, and dimensionless drawdown. The average radius of influnce for slug/bail tests were estimated to be 1.377 m in sbt-1 well, 1.253 m in sbt-2 well, and 1.558 m in sbt-3 well. Pore volume at groundwater level drawdown zone by dummy withdrawal for bail tests were estimated to be $145,636cm^3$ in sbt-1 well, $71,561cm^3$ in sbt-2 well, and $100,418cm^3$ in sbt-3 well. Pore volume excepted well volume at groundwater level drawdown zone by dummy withdrawal for bail tests were estimated to be $145,410cm^3$ in sbt-1 well, $71,353cm^3$ in sbt-2 well, and $100,192cm^3$ in sbt-3 well.

본 연구에서는 모래층(sbt-1공), 실트질 모래층(sbt-2공) 및 모래와 실트질 모래의 혼합층(sbt-3공)에서 순간충격시험이 수행되었다. 그리고, 현장시험에 의해 산정된 수리전도도와 비저류계수를 이용하여 회수시험 시 지하수위 강하구역의 공극체적을 산정하였다. 순간충격시험의 해석은 KGS 모델이 가장 적합하였으며, 주입시험과 회수시험 시 평균수리전도도는 sbt-1공 $6.65{\times}10^{-5}$m/sec, sbt-2공 $6.33{\times}10^{-6}$m/sec, sbt-3공 $3.72{\times}10^{-5}$m/sec이며, 평균비저류계수는 sbt-1공 0.0225, sbt-2공 0.0177, sbt-3공 0.0259로 산정되었다. 투수량계수, 저류계수, 시험시간 및 시험공 제원을 이용하여 무차원 시간과 무차원 우물저류계수를 산정하였다. 그리고, Cooper 등(1967)이 제시한 변수 ${\alpha}$와 ${\beta}$를 이용하여 무차원 수두강하량이 선정되었다. 산정된 무차원 시간, 무차원 우물저류계수 및 무차원 수두강하량을 이용하여 순간충격시험 시의 영향반경이 산정되었다. 주입시험과 회수시험 시 평균영향반경은 sbt-1공 1.377 m, sbt-2공 1.253 m, sbt-3공 1.558 m로 산정되었다. 그리고, 회수시험 시 더미 회수에 의한 지하수위 강하구역의 공극체적은 sbt-1공 $145,636cm^3$, sbt-2공 $71,561cm^3$, sbt-3공 $100,418cm^3$로 산정되었으며, 시험공의 부피를 제외한 지하수위 강하구의 공극체적은 sbt-1공 $145,410cm^3$, sbt-2공 $71,353cm^3$, sbt-3공 $100,192cm^3$이었다.

Keywords: Soils;Slug/bail test;Radius of influence;Groundwater level drawdown zone;Pore volume;

Keywords: 토양층;순간충격시험;영향반경;지하수위 강하구역;공극체적;