Processing math: 100%

  • A Study on Pump and Treat Design through Evaluation of Radius of Influence
  • Kim, Jeong-Woo;Lee, Kang-Kun;
  • School of Earth and Environmental Sciences, Seoul National University;School of Earth and Environmental Sciences, Seoul National University;
  • 영향반경을 이용한 양수처리법 설계에 대한 연구
  • 김정우;이강근;
  • 서울대학교 지구환경과학부;서울대학교 지구환경과학부;
Abstract
It is necessary to decide the pumping rate and pumping well location together with the capture zone in order to determine an appropriate groundwater remediation strategy to manage the contaminated groundwater. The relationship between the capture zone and the drawdown radius of influence (ROIs) was considered. ROIcs is defined as the distance where the criteria of drawdown is cs meter from pumping well in this paper. A method to decide the required pumping rate for the remediation of contaminated groundwater in order to create appropriate ROIcs is suggested by using the Theis equation (1935) and Cooper-Jacob equation (1946). It was shown in this study that ROIcs is in proportion to the pumping rate and the criteria of drawdown, which decides ROIcs, is inversely proportional to Ti value (transmissivity × hydraulic gradient). The pumping rate which creates the required ROIcs could be planned through the relationship between the ROIcs and pumping rates (ROIcs-Q curve) of the field sites 1, 2 and 3. If the drawdown is investigated along with Ti value and pumping rate at a specific site where pump and treat remediation is planned, it is expected that the required criteria of drawdown can be evaluated by using the relationship between the cs and Ti (cs-Ti curve).

Keywords: Pump and treat;Radius of influence (ROI);Capture zone;Criteria of drawdown (cs);

This Article

  • 2014; 19(3): 1-14

    Published on Jun 30, 2014

  • 10.7857/JSGE.2014.19.3.001
  • Received on Feb 6, 2013
  • Revised on Mar 14, 2014
  • Accepted on Mar 14, 2014

Correspondence to

  • E-mail: