• Study on Determination of Permissible Soil Concentrations for Explosives and Heavy Metals
  • Kim, Moonkyung;Jung, Jae-Woong;Nam, Kyoungphile;Jeong, Seulki;
  • Dept. of Civil and Environmental Engineering, Seoul National University;National Instrumentation Center for Environmental Management, Seoul National University;Dept. of Civil and Environmental Engineering, Seoul National University;Seoul Center, Korea Basic Science Institute;
  • 화약류 및 중금속의 인체위해성평가 및 생태독성에 기반한 토양허용농도도출에 관한 연구
  • 김문경;정재웅;남경필;정슬기;
  • 서울대학교 건설환경공학부;서울대학교 농생명과학대학 농생명과학공동기기원;서울대학교 건설환경공학부;한국기초과학지원연구원 서울센터;
Abstract
Permissible soil concentrations for explosives (i.e., TNT and RDX) and heavy metals (i.e., Cu, Zn, Pb, and As) heve been derived from human risk and ecotoxicity, respectively. For TNT and RDX, human risk based-permissible soil concentrations were determined as 460 mg-TNT/kg-soil and 260 mg-RDX/kg-soil. Ecotoxicity based-permissible soil concentrations for Cu and Zn were determined from species sensitivity distribution (SSD) and uncertainty factor of 1 to 5, yielding 18.0-40.0 mg-Cu/kg-soil and 46.0-100 mg-Zn/kg-soil. For Pb and As, ecotoxicity data were not enough to establish SSD so that a deterministic method was used, generating 13.8-30.8 mg-Pb/kg-soil and 2.10-4.60 mg-As/kg-soil. It is worth noting that the methodology used to derive permissible concentrations in soil can differ depending on ecotoxicity data availability and socio-economic situations, which results in different permissible concentrations. The permissible concentrations presented in this study have been derived from conservative assumptions for exposure parameters, and thus should be considered as soil standards. In the light of remediation and pollution management of a site of interest, the site-specific and receptor-specific permissible soil concentrations should be derived considering potential receptors, current and future land use, background concentrations, and socio-economic consultation.

Keywords: Permissible soil concentration;Explosive;Heavy metal;Firing range;

This Article

  • 2015; 20(6): 19-27

    Published on Nov 30, 2015

  • 10.7857/JSGE.2015.20.6.019
  • Received on Oct 1, 2015
  • Revised on Nov 5, 2015
  • Accepted on Nov 20, 2015

Correspondence to

  • E-mail: