• Investigation of Strength Characteristics of Ferrous Slag and Waste Concrete in Water Contacting Environment by Exposure to Raining Events
  • Kim, Byung-Gon;Shin, Hyunjin;Lee, Seunghak;Park, Junboum;
  • K-water (Korea Water Resources Corporation);Department of Civil and Environmental Engineering, Seoul National University;Center for Water Resource Cycle, Green City Technology Institute, Korea Institute of Science and Technology (KIST);Department of Civil and Environmental Engineering, Seoul National University;
Abstract
Ferrous slag is a by-product from steel making process and waste concrete is generated from construction activities. Large part of ferrous slag and waste concrete are recycled as construction materials. However, Ca2+ leaching out of ferrous slag and waste concrete in the water-contacting environment can cause a strength change. Strength can be reduced due to the dissolution of solid form of CaO which is one of the main contents of ferrous slag and waste concrete. On the other hand, strength can be enhanced due to the pozzolanic reaction of cementitious components with water. In this study, steelmaking slag, blast furnace slag, and waste concrete were aged by exposure to raining events, and the change of their compaction and shear strength characteristics was investigated. Optimum moisture content of all materials used in this study increased with aging period while maximum dry unit weight slightly decreased, implying that the relative contents of fine particles increased as the CaO solid particles were dissolved. Internal friction angle and shear strength of recycled materials also increased with aging period, indicating that the materials became denser by the decrease of void ratio attributed to the fine particles generated during the weathering process and the development of cementitious compounds increasing the bonding and interlocking forces between the particles. The results of this study demonstrated that mechanical strength of recycled materials used as construction materials has little chance to be deteriorated during their service life.

Keywords: Steelmaking slag;Blast furnace slag;Waste concrete;Harvard miniature compaction test;Direct shear test;

References
  • 1. Arulrajah, A., Piratheepan, J., Aatheesan, T., and Bo, M. W., 2011, Geotechnical properties of recycled crushed brick in pavement applications, Journal of Materials in Civil Engineering, 23(10), 1444-1452.
  •  
  • 2. Bujang, B.K.H., Shukri, M., and Thamer, A.M., 2003, Effect of chemical admixtures on the engineering properties of tropical peat soils, American Journal of Applied Sciences, 2(7), 1113-1120.
  •  
  • 3. Chang, P., Park, Y., Song, C., Woo, C., and Lee, S., 2001, Compaction and strength characteristics of reinforced soil for building divider, Geosynthetics-2001 conference.
  •  
  • 4. Gengying, L. and Xiaohua, Z., 2003, Properties of concrete incorporating fly ash and ground granulated blast-furnace slag, Cem. Concr. Res., 25, 293-299.
  •  
  • 5. Hajiali, A., Adnan, A., and Chew, K.C., 1992, Geotechnical properties of a chemically stabilized soil from Malaysia with rice husk ash as an additive, Journal of Geotechnical and Geological Engineering, 10(2), 117-134.
  •  
  • 6. Jin, S., Lee, H., Hwang, J., Jin, C., and Park, H., 2003, An experimental study to determine the mechanical properties of recycled aggregate separated from demolished concrete and recycled aggregate concrete, The Journal of Engineering Geology, 3(3), 345-358.
  •  
  • 7. Kim, D., Lee, J., Lee, H., and Son, J., 2003, A study on application of composite slag for roadbed material, J. Korea Soc. Waste Manag., 17(4), 374-383.
  •  
  • 8. Kim, Y. and Kang, H., 2009, Shearing properties of waste tire powder-added lightweight soil by direct shear test, Journal of the Korean Society of Ocean Engineering, 23(3), 20-29.
  •  
  • 9. Lee, K. and Lee, J., 2003, Comparative study of mixed soils with PFA and blast furnace slag, 2003 Annual Conference of Korean Society of Civil Engineering, 3445-3450.
  •  
  • 10. Lee, Y., Kwan, Y., and Hyun, J., 2005, The engineering and environmental properties of reclaimed concrete materials as road materials, J. Korea Geo-Environ. Soc., 6(3), 17-23.
  •  
  • 11. Limbachiya, M.C., Koulouris, A., Roberts, J.J., and Fried, A.N., 2004, Performance of recycled aggregate concrete, RILEM International Symposium on Environment-Conscious Materials and System for Sustainable Development, 127-136.
  •  
  • 12. Mostafa, N.Y., El-Hemaly, S.A.S, Al-Wakeel, E.I., El-Korashy, S.A., and Brown, P.W., 2001, Characterization and evaluation of the hydraulic activity of water-cooled slag and air-cooled slag, Cem. Concr. Res., 31, 899-904.
  •  
  • 13. Osinubi, K.J., 2006, Influence of compactive efforts on limeslag treated tropical black clay, J. Mater. Civ. Eng., 18(2), 175-181.
  •  
  • 14. Peter, J.B. and Carlos, O.G., 1987, Frictional properties between sand and various construction materials, Journal of Geotechnical Engineering, 113(9), 1035-1039.
  •  
  • 15. Shi, C., 2004, Steel slag-its production, processing, characteristics, and cementitious properties, Journal of Materials in Civil Engineering, 16(3), 230-236.
  •  

This Article

  • 2016; 21(2): 1-7

    Published on Apr 30, 2016

  • 10.7857/JSGE.2016.21.2.001
  • Received on Dec 3, 2015
  • Revised on Dec 5, 2015
  • Accepted on Feb 2, 2016